Aluminum-alloy frame with silicone-lined contact points
Design
Give closed devices a clear place beside the workstation.
Use the stand as a parking position between sessions. A closed laptop or tablet stays upright and within reach, while the keyboard area remains available for the work in front of you.
Closed-device parking example · two devices in one stand
Keep devices visible
Upright storage keeps a closed laptop or tablet easy to reach without leaving it flat on the desk.
Leave the working area open
Move inactive devices out of the keyboard zone; this stand is for storage, not typing on an open laptop.
Product Dimensions
Match the configuration to the device you will store.
Choose the one-device or two-device configuration first, then measure each closed device at its thickest point with the case on. The table below holds the exact fit and overall dimensions.
One-device configurationTwo-device configuration
1 Slot
One device · 9–41 mm thick; 92–109 × 148 × 60 mm overall
2 Slots
Two devices · 12–30 mm per slot; 96–132 × 148 × 57 mm overall
Compatibility
Closed laptops and tablets whose total thickness fits the selected configuration
Adjust the supports, then check the fit.
Loosen the hand-tightened fasteners, slide each support until the device sits upright without being pinched, then tighten evenly by hand. Recheck the width whenever a case is added or removed.
Material & Care
A rigid frame, softened at every contact point.
The aluminum-alloy body provides the stand's structure. Ribbed silicone lines the device supports, while silicone pads beneath the base add grip and separate the metal frame from the desktop.
Frame
Finished aluminum alloy
Device contact
Ribbed silicone lining inside each support
Desktop contact
Non-slip silicone base pads
Available finishes
Black, Silver, and Space Gray
For routine dust
Use a soft, dry microfiber cloth around the frame and silicone surfaces.
For fresh marks
Wipe gently with a slightly damp soft cloth, then dry the stand before returning a device.
What to avoid
Do not use abrasive pads, solvents, alcohol-heavy cleaners, or standing moisture on the frame or pads.
Shipping info
US deliveryShips from a US warehouse to eligible US addresses.
Tracked deliveryDispatches within 48 hours of ordering. Typical US delivery is about 7 days. Tracking is sent when the order ships. Contact us before ordering if you need delivery by a specific date.
Delivery costStandard delivery is free to the contiguous 48 US states and Washington, DC, including rural and remote ZIP codes. Alaska, Hawaii and other supported special destinations have a US$19.99–US$99.99 delivery charge based on combined order weight, shown at checkout. Deskmith covers any delivery cost above that charge. No additional customs duties or import fees are charged. Any applicable sales tax is shown at checkout.
30-day returnsEligible unused and uninstalled items in their original packaging may be returned within 30 days of delivery.
Return instructionsContact us before sending anything. Return shipping is paid by the customer unless the item arrived damaged or defective.
When a closed laptop or tablet feeds an external display, the stand stores it upright instead of stacking it flat. The footprint stays compact, cables remain within reach, and padded contact surfaces support the device where it rests.
Use height, not desk area.
A vertical docking position clears the footprint a closed device would otherwise occupy and keeps the connected workstation visually contained.
Adjust the cradle, not the device.
Hand-tightened underside fasteners let the 1 Slot supports move from 9–41 mm and the 2 Slots supports from 12–30 mm, so the stand adapts to the measured device rather than squeezing it into a fixed slot.
Rigid frame. Cushioned contact.
The aluminum-alloy structure holds its form, while ribbed silicone lines the supports and non-slip pads separate the base from the desktop.
Specifications
Construction
Aluminum-alloy body with silicone device-contact surfaces and non-slip base pads
1 Slot fit
9–41 mm (0.35–1.61 in) device thickness
2 Slots fit
12–30 mm (0.47–1.18 in) device thickness per slot
1 Slot size
92–109 × 148 × 60 mm (3.62–4.29 × 5.83 × 2.36 in)
2 Slots size
96–132 × 148 × 57 mm (3.78–5.20 × 5.83 × 2.24 in)
Finishes
Black, Silver, or Space Gray
Compatibility
Closed laptops and tablets within the supported thickness range
Adjustment
Four hand-tightened underside fasteners; no tools required
In the box
One stand in the selected configuration and finish
Setup & Care
Measure with the case on
Measure the device at its thickest closed point, including any case that will remain attached. Choose 1 Slot for one device that measures 9–41 mm, or 2 Slots when each device measures 12–30 mm.
Adjust both supports evenly
Place the stand on a clean, dry, flat desktop. Loosen the underside fasteners, slide the supports to a secure upright fit, then tighten them evenly by hand. The stand arrives assembled; no tools are required.
Clean without abrasives
Use a dry microfiber cloth for dust or a slightly damp soft cloth for marks, then dry promptly. Avoid solvents, abrasive pads, and standing moisture.
FAQ
Can it hold a tablet as well as a laptop?
Yes. A tablet can be stored upright when its total thickness fits securely within the selected range: 9–41 mm for 1 Slot or 12–30 mm per slot for 2 Slots.
Is it meant for an open laptop?
No. This is a vertical storage and docking stand for inactive or closed devices, not an elevated typing stand for an open laptop.
Can cables remain connected while the device is docked?
They can when the device's port layout allows it. Orient the device so connected ports remain accessible, leave a relaxed cable path, and never force a connector against the stand.
Does it arrive assembled?
Yes. The stand arrives as one assembled unit; only the support width needs to be adjusted by hand for the device.
Are the laptop, tablet, or cables included?
No. The box contains one stand in the selected configuration and finish. Devices, cases, chargers, and cables are shown only to demonstrate use.
